Rebelcell 12V80 PRO Bedienungsanleitung Seite 4

REBELCELL BLUETOOTH APP
General
With the introduction of the Rebelcell PRO lithium batteries, the traditional display to monitor
voltage and capacity has become obsolete. The Rebelcell PRO batteries can now be monitored
by the Rebelcell Bluetooth App: simple and fast, wireless, and therefore more practical for
batteries that are built into a boat.
Installation:
• The App is available for Android (from version 6.0) and Apple
(from iOS version 11) devices.
• Download and install the Rebelcell App from the Google Play
Store or App Store.
Connecting the app to a Rebelcell Pro battery
• Open the Rebelcell App and make sure the battery is within
7 meters of the phone.
• Tap the Bluetooth icon on the top right and all Rebelcell PRO
batteries in range will appear.
• Tap on the battery you want to connect. You will now get the
message 'Connecting'.
• The Rebelcell App is now connected to the battery via
Bluetooth.
Available information
• After a successful connection you will see an overview of the
battery: current voltage, capacity, active status and the battery
health.
• By swiping or tapping the other 2 icons you will move to the
next screen.
• The middle screen shows detailed information: number of
charging cycles, temperature, and in/output currents.
• The last screen contains a login page, intended for possible
failure analysis.
TROUBLESHOOTING FOR REBELCELL APP
• What to do if the connection to the battery is lost?
This can occur when you have not opened the App. To save
energy, the App disconnects from the battery after some time.
Also, if you are out of range of the battery, it will disconnect.
Often the App will reconnect when you reopen the App. You
can also reconnect to the battery using the Bluetooth icon in
the top right of the screen.
• When I use my Android device no batteries appear in the app?
When installing the Rebelcell App on an Android device, you
will be asked to grant permission for location access. You
must allow this feature or the App will not function properly.
Also location (gps) must be turned on when using the App on
an Android device.
• My battery is visible on the app but I cannot connect to the Rebelcell PRO battery?
Close the Rebelcell App completely and restart it. You can do this as follows:
Apple: Double-click the home button or (from iPhone 11 and up) swipe up slowly from the
bottom of the screen and stop halfway down the screen. Then swipe the preview of the
Rebelcell App up to close it completely.
Android: Click the Overview button so all active Apps are visible and swipe the Rebelcell App
up off the screen.
• I am trying to connect to another device but this is not working?
The app can only be connected to 1 device simultaneously. First close the connection and/or
'kill' the app before you connect to another device.
CAUTION!
When you install the Rebelcell App on an Android device you will be asked to grant
permission for location access. You need to allow this or the App will not function
correctly!