Shake; Instructions For Use - Create STYLANCE Bedienungsanleitung

• In the wheel panel: OFF means off; ON implies standby mode, you can use the program
function; and MAX is a continuous speed control where the maximum speed remains at
the same MAX.
• Use the rotary button to turn on, turn off and change the speed.
• The blender has three different programs to choose from: "ice crush" to crush ice; smoothie
for smoothie; and "interval" to cut intermittently (turn, stop, turn, stop, etc.).
• Turn the button to ON and choose your program. If the product works in "Smoothie" mode,
press the "Smoothie" button, the product will stop working and enter standby mode. If you
press another function mode, the product will switch to the corresponding new mode.
• The maximum capacity of the jug is indicated on it, do not allow it to exceed the maximum
indicated on the level mark.
• This blender does not allow its operation if it is empty, as a suggestion use 2 parts of fruit
and 3 of water (with fruits such as carrots, apples, etc.) and the operating time should not
exceed 2 minutes.
Caution:
• The mixer has a safety switch. If the blender jar is not in position or if you remove it during
operation, the product will not work. You need to put the blender jar in its correct position,
turn the knob to "0" position, and then you can start using the product.
• Includes overheat protection. If the product overload works for a long time, the thermal
limiter will stop the product to prevent the motor from overheating. If the thermal limiter
works, reduce the load on the mixer jar and wait almost 30 minutes for the motor to cool
down, then use the product again. If the LED light continues to flash but the product still
does not work, please wait another 10-20 minutes.
• Over current protection. If you blend very hard or large foods incorrectly, the blade may get
stuck and the current limiter will stop the product. If the current limiter is in operation, turn
off the product and remove the very hard or very large food, then use the product again.
SH AK E
1. Put the food to be processed in the jar.
2. Put the lid firmly on the jar. Insert the gauge cap into the cap opening and turn clockwise
to lock.
3. Plug it in, then turn ON and choose the "Smoothie" program.
• Speeds:
• Low: Light mixes with liquid ingredients.
• Half: Thicker consistency, with a mixture of liquid and solid ingredients.
• High: Instant energy burst.
4. After use, always turn the switch to the OFF position and unplug the main unit.
5. To remove the carafe, lift it up; no need to twist it.

INSTRUCTIONS FOR USE

E NGLI SH
9