Component List; Technical Data; Noise Information; Vibration Information - Kress KUB35.91 Originalbetriebsanleitung

SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Li-Ion battery This product has been
marked with a symbol relating to
'separate collection' for all battery
packs and battery pack. It will then
Li-I on
be recycled or dismantled in order to
reduce the impact on the environment.
Battery packs can be hazardous for the
environment and for human health since
they contain hazardous substances.
8
Waste electrical products must not
be disposed of with household waste.
EN
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice..
Do not burn
Batteries may enter water cycle if
disposed improperly, which can be
hazardous for ecosystem. Do not
dispose of waste batteries as unsorted
municipal waste.
Wear protective gloves

COMPONENT LIST

FORWARD AND REVERSE ROTATION
1.
CONTROL
2. BATTERY PACK*
3. BATTERY PACK RELEASE BUTTON *
4. SPEED ADJUSTMENT BUTTON
5. ON/OFF SWITCH
6. LED LIGHT
7. SQUARE DRIVE ROD
8. BATTERY CAPACITY INDICATOR
* Not all the accessories illustrated or
described are included in standard delivery.

TECHNICAL DATA

Type Designation KUB35.91 (B35 - designation
of machinery, representative of impact wrench)
Rated voltage
No load speed
Impact rate
Max torque
Drive rod size
Anvil Type
Weight (bare)
** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection.

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined
according to EN 62841:
Vibration emission value a
KUB35.91
20V Max**
0-900/1100/1800/min
0-1000/1600/2400bpm
1700Nm
3/4" (19mm)
Friction ring
3.4kg
L = dB(A)
pA
L = dB(A)
wA
dB(A)
= m/s²
h