Deltaco DUR-798 Bedienungsanleitung Seite 43

6.1 Delete from the beginning of the barcode
For example: the barcode is ABCD1234 and the amount to delete is 4 characters. The resulting output will be: 1234.
Example barcode setting:
02700000 = Leading-order
0B270 06
Reset this setting:
0B270 = Leading-order • 06
6.2 Delete from the end of the barcode
Example barcode setting:
02800000
= Leading-order
Reset this setting: 0B280 05
0B280 = Leading-order • 05
6.3 Delete from the middle of the barcode
This setting deletes characters from a specified place of the barcode.
For example: The barcode is 12345ABC, specified place is 001, and amount of characters to be deleted are 4.
The resulting output will be: 1ABC.
Example barcode setting:
02900000 = Leading-order
06 = amount of characters to be deleted (1 to 50)
0B290 04
Reset this setting:
0B290 = Leading-order • 04
7. Retain characters of barcodes
No matter how many characters of the barcode there are, these settings keep part of the characters.
7.1 Retain N characters from the beginning of barcodes
No matter how many characters the barcode has, retain the first 4 characters, if the characters of the barcode are more than
4.Example barcode setting:
02D00000
= Leading order
Reset this setting: 0B2D0 04
0B2D0 • 04
= Leading order
7.2 Retain N digits from the end of the barcode
Example barcode setting:
02EO0000 = Leading-order
0B2EO 04
Reset this setting:
0B2EO
= Leading order
8. Replace characters of the barcode
For example: The barcode is 1234ABCD90, we want to replace ABCD with 56789. The resulting output would be:
12345678990.
Example barcode setting:
02A00000= Leading-order
ABCD
= Characters to replace
0B2A0 0
Reset this setting:
0B2A0= Leading order
9. Adding prefix/suffix
Prefix/suffix refers to invisible characters like ENTER, TAB, F2, F3, etc. A maximum of 6 prefix and 7 suffix can be enabled.
9.1 Prefix
Example to enable prefix of ENTER, TAB, F2 in order.
Example barcode setting:
02B00000 = Leading-order
08280
Reset this setting:
08280 = Leading order • 00
9.2 Suffix
Example to enable suffix Ctrl + Esc for all barcode types.
Example barcode setting:
02C00000
= Leading order
Reset this setting: 0B2C0 00
0B2C0 • 00
= Leading order
02700000 06 04
• 06 = Specific/global
= Specific/global
02800000 05 04
• 05
= Specific/global
= Specific/global
02900000 04 002 06
• 04 = Specific/global
= Specific/Global
02D00000 00 04
• 00 • 04
= Specific/global
= Specific/global
02EO0000 01 04
• 01 = Specific/global • 04
• 04
= Specific/global
02A00000 05 4 ABCD 5 56789
• 05 = Specific/global • 4
• 5
= Amount of characters to add
05 = Specific / global
02B00000 00 $ 0D $ 0A $ 81
• 00 = Specific/global • $
= Specific / Global
02C00000 00 $ AB $ 1B $ B3
• 00
= Specific/global
= Specific/global
• 04 = Amount of characters to delete from 01 to 50
• 04
= Amount of characters to delete from 01 to 50
• 002 = Specified place of the barcode (001 to 250)
= Amount to retain (01 to 99)
= Amount to retain (01 to 99)
= Amount of characters to replace (1 to 9)
• 56789
= Prefix/suffix indicator • OD
• $
= Prefix/suffix indicator
42
•
= Characters to add
= prefix/suffix, for more details see appendix B.
• AB
= Prefix/suffix, for details see appendix B
•