Deltaco DUR-798 Bedienungsanleitung Seite 42

There are 9 kinds of settings:
1. Delete part of the barcode before a designated code. (Regular expression)
For example: If the input barcode is ABC1234DEFG, and the designated code is 1234. The letters before the designated
code (1234) will be deleted. The resulting output will be: 1234DEFG.
Example barcode setting:
02000000 = Leading-order • 00 = Specific/global • 3 = Amount of characters (1 to 9) 123 = designated code, from 32 to 126 of ASCII.
0B200 00
Reset this setting:
0B200
= Leading order •
2. Delete all before the matching characters.
For example: If the input barcode is AAA1234, and the designated character is A. The resulting output will be: 1234
Example barcode setting:
02100000
= Leading order
0B210 01
Reset this setting:
0B210 = Leading order •
3. Delete all that is after the matching characters.
This works the same as 2, but deletes letters counting from the last digit.
For example: If the input barcode is 1234AAA, and the designated character is A. The resulting output will be: 1234.
Example barcode setting:
02200000 01 A = Leading order
0B220 01
Reset this setting:
0B220 = Leading order • 01
4. Delete a specified character
For example: The barcode is A12A34AA56789A, the specified letter is A. The resulting output will be: 123456789.
This example barcode setting would delete character 7:
02300000
= Leading order
Reset this setting: 0B230 02
0B230 = Leading order • 02
5. Adding characters
Three ways to add characters: from the beginning of the barcode, the middle and the end of the barcode.
5.1 Adding characters from the beginning of the barcode.
For example: The barcode is 1234, added characters are ABC. The resulting output will be: ABC1234.
Example barcode setting:
02400000 = Leading order
ABC
= Added characters, from 32 to 126 of ASCII.
0B240 01
Reset this setting:
0B240 = Leading-order • 01
5.2 Adding characters from the end of the barcode.
Example barcode setting:
02500000
= Leading-order
ABCD = Added characters, from 32 to 126 of ASCII.
0B250 08
Reset this setting:
0B250
= Leading order •
5.3 From the middle of the barcode
Use this setting to add characters to any place of the bar code.
For example: The barcode is 1234, chosen position is 1, and characters are ABC. The resulting output will be: 1ABC234.
Example barcode setting:
02600000 = Leading order
3
= amount of added letters number from 1 to 9
Reset this setting: 0B260 06
0B260 = Leading order •
6. Delete letters
Three ways to delete characters: from the beginning of the barcode, the middle and the end of the barcode.
02000000 00 3 123
00= Specific / global
02100000 01 A
• 01 • A
= Specific/global
01= Specific/global
02200000 01 A
• 01 = Specific /global
= Specific/ global
• 02
= Specific/global •
= Specific/global
02400000 01 3 ABC
• 01 = Specific/global •
= Specific/global
02500000 08 4 ABCD
08
= Specific/global
08 = Specific/ Global
02600000 06 001 3 ABC
• 06 = Specific/global • 001
• ABC
06 = Specific / global
= designated character, from 32 to 126 of ASCII.
• A = designated character
02300000 02 7
7= designated letter, from 32 to 126 of ASCII.
3 = Amount of characters to be added, from 1 to 9
4
= Amount of added characters, from 1 to 9
= Added position from 001 to 250
= added letters, from 32 to 126 of ASCII.
41
•
•
•