AYI A1 600i Bedienungsanleitung Seite 23

PIN code
1. PIN code should be entered after
powering on, pressing STOP button, and
before clearing error status and changing
PIN code.
2. If the PIN code is incorrect, the screen
will show "PIN wrong, please retry'.
3. If the PIN code is entered incorrectly 3
times, the screen will be locked for 15
seconds. The lock time will double for
further incorrect entries.
Factory reset
1. Press OK button to enter sub-menu 1.
2. Select 'setting' to enter sub-menu 2.
3. Select 'factory reset'.
4. The screen shows 'Reset to factory
mode?'
5. Press OK button to confirm.
In the event of malfunction the error log will record all actions and can be used for
service maintenance and fault finding.
Change PIN code
1. Press OK button to enter sub-menu 1.
2. Select 'setting' to enter sub-menu 2.
3. Select 'change PIN'.
4. Enter the original PIN code.
5. Enter new PIN code.
6. Enter the new PIN code again. ('New
passwords do not match' will be shown for
inconsistent passwords.)
7. Press OK button to confirm.
Error log
1. Press OK button to enter sub-menu 1.
2. Select 'setting' to enter sub-menu 2.
3. Select 'information' to enter sub-menu 3.
4. Select 'error log'.
5. The past 10 records (including date,
time and error message) will be shown.
- 21 -