Installation And Mounting - CTC EcoTouch 500 DT Serie Planung Und Installation

6 Installation and mounting

The hydraulic station is installed in the building. The hydraulic station is
delivered pre-assembled and finally assembled at the place of use.
The hydraulic station must be installed in a level and horizontal place. It is
set up on the ground and fixed to the floor and/or wall. Then the supplied
components are mounted according to the instructions. After the hydraulic
connections have been mounted, a leakage check is carried out and the
unit is filled with operating medium.
Abbildung 17: Hydraulikstation 590028301
44
Copyright © 2021 av: CTC Professional. Kan komma att ändras.