Hama 00201973 Bedienungsanleitung Seite 4

G Operating Instructions
Thank you for choosing a Hama product.
Take your time and read the following instructions and information
completely. Please keep these instructions in a safe place for future
reference.
1. Explanation of warning symbols and notes
Warning
This symbol is used to indicate safety instructions or to draw your
attention to speci c hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
2. Package contents
• 1 x bicycle / motorbike case for smartphones
• 1 x bicycle clamp
• 1 x motorbike clamp
• These operating instructions
3. Safety instructions
• This product is intended for private, non-commercial use only.
• Use the product only for the intended purpose.
• When using this product, observe the applicable local tra c laws and
regulations.
• Do not drop the product and do not expose it to any major shocks.
• Keep the packaging material out of the reach of children due to the risk
of suffocation.
• Dispose of packaging material immediately in accordance with the
locally applicable regulations.
• Do not modify the product in any way. Doing so voids the warranty.
4. Installation
Warning - risk of injury
• While driving a car or using sports equipment, do not allow yourself to
be distracted by your product and keep an eye on the tra c situation
and your surroundings.
• The product is not intended for mounting on carbon components
(e.g. handlebars). Carbon components can be damaged by the clamp,
break, and subsequently cause serious accidents and injuries.
Note - splash-protected
• The smartphone case is water-repellent and thus protects your
smartphone from light rain showers and splashing water.
• Remove your smartphone from the case in heavy rain or when riding
for a long time in the rain.
2
Note
• Never apply force when using the product or during installation.
• Please note that smartphones are attached at the user's own risk.
4.1 Installation - bicycle clamp
• Open the clamp by loosening the screw and pull the ratchet strap out.
A1
• Guide the ratchet strap around the bar and back through the ratchet
A2
head.
• Tighten the screw on the clamp.
• Store your smartphone as shown in the smartphone case.
4.2 Installation - motorbike clamp
• Open the clamp by loosening the threaded screws and remove the
A1
bracket.
• Place the clamp on top of the bar and x the bracket from behind using
A2
the threaded screws.
• Tighten the threaded screws by hand.
• Store your smartphone as shown in the smartphone case.
4.3 Attaching the smartphone case
• Insert the smartphone case as shown.
• The smartphone case is securely attached when it engages in the clamp
with an audible click.
Note
Ensure that the product is securely mounted before every journey.
4.4 Dismantling
• To dismantle, release the retaining clips by carefully pulling them
E1
upwards.
• Then press and hold the unlocking button and pull the smartphone case
E2
downwards.
5. Warranty disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for
damage resulting from improper installation/mounting, improper use of
the product or from failure to observe the operating instructions and/or
safety notes.
A3
B
A3
B
D