Herunterladen Diese Seite drucken

Dexford STH 1 Bedienungsanleitung Seite 4

Externer temperatur- und luftfeuchtigkeitssensor

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

STH 1
Remote Temperature and humidity Sensor
5
ENGLISH
Operating Instructions
Please read and observe the following information and keep the
operating manual nearby for future reference!
WARNING!
Safety information
 Only use batteries of the same type!
 Always treat batteries with due care and attention and only use
batteries as described.
 Never use standard and rechargeable batteries together. Never use
rechargeable batteries or standard batteries with different capacities or
charge statuses together. Never use standard or rechargeable batteries
which are damaged.
 Risk of suffocation through small objects, packaging and protective foil!
 Keep children away from the product and its packaging!
 Risks to health and the environment from batteries!
 Never open, damage or swallow batteries or allow them to pollute the
environment. They could contain toxic and ecologically harmful heavy
metals.
ATTENTION!
 Prevent exposure to environmental influences, e.g. smoke, dust,
vibration, chemicals, moisture, heat and direct sunlight.
 Only allow repairs to be completed by qualified personnel.
PACKAGE CONTENTS
1 Remote temperature and humidity Sensor, Operating manual
OPERATING ELEMENTS
1 Hang hole
2 Screws
3 Reset
4 Channel switch
5 TX
During initial installation, the unit may take up to an hour or more
to acclimatise to current conditions. It is recommended to put the
unit in the room where it will be used at least 1 hour prior to initial
installation.
STARTING UP
 Open battery compartment on the back of the unit by removing the two
small screws (2) with a Philips head screwdriver.
 Install / replace with 2 AAA 1,5 V size batteries in the compartment. It is
recommended that only alkaline batteries are used. Do not use
rechargeable batteries.
 The remote sensor is capable of receiving up to 3 different
channels. Select the channel number (1,2, or 3) by sliding the „Channel
1, 2 or 3" switch (4). If you only have 1 remote temperature sensor,
select 1. Press the TX button once after switching channel. Please
also read the manual of your weather station.
 Press the „Reset" button (3) once and the red light will flash once.
 Replace the battery compartment on the back of the unit by tightening
the two screws (2).
INSTALLATION
 Place the remote sensor at a desired place by mounting the unifs hang
hole (1) on a screw (screw not included). Alternatively, the uhit can be
place on a flat horizontal surface.
 The unit can be placed indoor or outdoor. The unit is weather proof. Do
not submerge unit in water. Do not expose unit to water for prolonged
periods. Avoid accumulation of water and or snow on unit. Avoid
exposing unit to direct sunlight. Remove unit from the exterior in
extreme or harsh weather, including but not limited to hurricane,
typhoon, and cyclones seasons. Do not place the unit in area of high
winds.
 Do not place the remote sensor more than 30 meters (98 feet) from the
receiving weather station. The remote sensor is most effective if there
are no obstruction and interference between the remote sensor and the
weather station. The remote sensor might have to closer than 30 meters
if the weather station is not able to receive any signals. This is due to
obstructions and interference. The user might need to experiment with
various locations to get the best reception.
COMPATIBLE WITH THE FOLLOWING EQUIPMENT:
WS2000, WS2500, WS4880, WSRC3000, WSRC3500,
RAC4700,RRCW4700, PCWS4600
Service hotline
In the case of technical problems, contact our Service hotline. Switzerland:
Tel. 0900 00 1675 (national charges, Swisscom at time of going to print:
CHF 2.60/min). In the case of claims under the terms of guarantee, contact
your sales outlet.
Maintenance
Clean the surface of the housing with a soft, fluff-free cloth. Do not use any
cleaning agents or solvents.
Guarantee
Dexford equipment is produced and tested according to the latest produc-
tion methods. The implementation of carefully chosen materials and highly
developed technologies ensure trouble-free functioning and a long service
life. The terms of guarantee do not apply to the batteries or power packs
used in the products. The period of guarantee is 24 months from the date
of purchase. All deficiencies related to material or manufacturing errors
within the period of guarantee will be redressed free of charge. Rights to
claims under the terms of guarantee are annulled following tampering by
the purchaser or third parties. Damage caused as the result of improper
handling or operation, normal wear and tear, incorrect positioning or
storage, improper connection or installation or Acts of God and other
external influences are excluded from the terms of guarantee. In the case
of complaints, we reserve the right to repair defective parts, replace them
or replace the entire device. Replaced parts or devices become our pro-
perty. Rights to compensation in the case of damage are excluded where
there is no evidence of intent or gross negligence by the manufacturer. If
your device does show signs of a defect within the period of guarantee,
please contact the sales outlet where you purchased the Dexford device,
producing the purchase receipt as evidence. All claims under the terms
of guarantee in accordance with this agreement can only be asserted at
the sales outlet. No claims under the terms of guarantee can be asserted
after a period of two years from the date of purchase and hand-over of the
product.
Disposal
In order to dispose of your device, take it to a collection point
provided by your local public waste authorities (e.g. recycling
centre). According to the laws on the disposal of electronic and
electrical devices, owners are obliged to dispose of old electronic
and electrical devices in a separate waste container. The adjacent
symbol indicates that the device must not be disposed of in normal
domestic waste!
You are legally obliged to dispose of power packs and batteries
at the point of sale or in the corresponding containers provided at
collection points by local public waste authorities. Disposal is free of
charge. The symbols indicate that the batteries must not be disposed of in
normal domestic waste and that they must be brought to collection points
provided by local public waste authorities. Packaging materials must be
disposed of according to local regulations.
Declaration of Conformity
This device fulfils the requirements stipulated in the Directive
1999/5/EC on radio equipment and telecommunications terminal
equipment and the mutual recognition of their conformity. Conformi-
ty with the above mentioned directive is confirmed by the CE mark on the
device. To view the complete Declaration of Conformity, please refer to the
free download available on our web site www.dexford.com.
Technical data (All rights reserved)
Feature
Value
STH 1
W x H x D
63 x 63 x 20 mm
Weight
approx. 41 g (without battery)
Power
2 x 1,5V AAA, not included
Temperature range
-20 ~ +50 °C

Werbung

loading