HIKVISION DS-PM1-RT-HWE Bedienungsanleitung

DS-PM1-RT-HWE
Wireless Receiver
User Manual
English
1
Appearance
1. Indicator
Green and orange quickly flashing
Slowly flashing light green:
alternately:
Waiting for enrollment
Enrolling
Solid orange:
Solid green: Enrolled
Enrolling failed/Fault (Disconnected)
Quickly flashing orange: Flashing green:
Alarm Find me mode
2. Tamper Button 3. Wiring Terminal 4. DIP Switch
2 Installation
3
Wiring
4 Address Settings
Configure the address via DIP switch of the receiver before
powering on the system. The address should be in the range
(0 to 63). The address of each receiver should be unique.
The binary value shown in the diagram is 000011, which means
the decimal value is 3, so the address of the module is 3.
Specification
Bus 1 Speed-X bus
Power supply 9 to 28 VDC, 1 A
Maximum current 100 mA@12 VDC;
Power consumption
Quiescent current 40 mA@12 VDC
RF frequency 868 MHz
Frequency Hoping 128 AES
Wireless security
Encryption
Green: Power/Find me
LED Indicator
Orange: Alarm/Fault
Dimension (W × H × D) 110 mm × 155 mm × 32 mm
Shell material Plastic
Weight 225 g
Operation temperature -10 °C to 40 °C
Operation humidity 10% to 90%
Up to 32 wireless detectors (portable
Alarm input
emergency button is not included)
Up to 4 wireless indoor sounder,
Wireless sounder
8 wireless outdoor sounder
UD28059B
1
1
2
1
3
BUS DC_IN
D- D+ -
ON DIP
CONTROL
6
BUS_ADDR
PANEL
Speed-X BUS
CONTROL
PANEL
BUS_IN BUS_IN
WIRELESS WIRELESS
RECEIVER RECEIVER
EXPANDER EXPANDER
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
2
ON DIP
6
BUS_ADDR
4
+
DC
Lowbit
POWER
BIN=000011
BIN Address
000000 0
000001 1
000010 2
000011 3
000100 4
000101 5
000110 6
000111 7
©2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other
information hereinafter are for description and explanation only. The information contained in the Manual
is subject to change, without notice, due to firmware updates or other reasons. Please find the latest
version of this Manual at the Hikvision website (https://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.
Other trademarks and logos mentioned are the properties of their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED,
WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH ALL FAULTS AND
ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE
PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY
SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES
FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS,
OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING
1 Indicator NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN
IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND
3 HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
2 Tamper Button
OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER
INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY
RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE
3 Wiring Terminal
RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF
THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS,
OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY
4
PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS
4 DIP Switch
DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY
ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN
SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
ELECTRIC CAUTION
BATTERY CAUTION
2
2
FIRE CAUTION
INSTALLATION CAUTION
Highbit
Address=3
BIN Address
111000 56
111001 57
111010 58
111011 59
111100 60
111101 61
111110 62
111111 63
and other Hikvision's trademarks and logos are the properties of Hikvision in various jurisdictions.
This product and - if applicable - the supplied accessories too are marked with "CE" and comply
therefore with the applicable harmonized European standards listed under the Directive
2014/53/EU(RED),Directive 2014/30/EU(EMCD),Directive 2014/35/EU(LVD),Directive
2011/65/EU(RoHS).
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as
unsorted municipal waste in the European Union. For proper recycling, return this product to
your local supplier upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union. See the product documentation for specific
battery information. The battery is marked with this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to
your supplier or to a designated collection point. For more information see: www.recyclethis.info
- In the use of the product, you must be in strict compliance with the electrical
safety regulations of the nation and region.
- Shock hazard! Disconnect all power sources before maintenance.
- The socket-outlet shall be installed near the equipment and shall be easily
accessible.
- Ensure correct wiring of the terminals for connection to an AC mains supply.
- The equipment has been designed, when required, modified for connection to an
IT power distribution system.
1. This equipment is not suitable for use in locations where children are likely to be
present.
2. CAUTION: Risk of explosion if the battery is replaced by an incorrect type.
3. Improper replacement of the battery with an incorrect type may defeat a
safeguard (for example, in the case of some lithium battery types).
4. Do not dispose of the battery into fire or a hot oven, or mechanically crush or
cut the battery, which may result in an explosion.
5. Do not leave the battery in an extremely high temperature surrounding
environment, which may result in an explosion or the leakage of flammable liquid
or gas.
6. Do not subject the battery to extremely low air pressure, which may result in an
explosion or the leakage of flammable liquid or gas.
7. Dispose of used batteries according to the instructions.
1. Risk of explosion if the battery is replaced by an incorrect type.
2. Improper replacement of the battery with an incorrect type may defeat a
safeguard (for example, in the case of some lithium battery types).
3. Do not dispose of the battery into fire or a hot oven, or mechanically crush or
cut the battery, which may result in an explosion.
4. Do not leave the battery in an extremely high temperature surrounding
environment, which may result in an explosion or the leakage of flammable liquid
or gas.
5. Do not subject the battery to extremely low air pressure, which may result in an
explosion or the leakage of flammable liquid or gas.
6. Dispose of used batteries according to the instructions.
+ identifies the positive terminal(s) of equipment which is used with, or generates
direct current. + identifies the negative terminal(s) of equipment which is used with,
or generates direct current.
- This equipment is suitable for mounting on concrete or other non-combustible
surface only.
- The serial port of the equipment is used for debugging only.
- This equipment is not suitable for use in locations where children are likely to be
present.
- Keep the equipment vertically down when moving or using it.
1. Install the equipment according to the instructions in this manual.
2. To prevent injury, this equipment must be securely attached to the floor/wall in
accordance with the installation instructions.