Conrad 2498549 Installationsanleitung Seite 2

Installation Instructions
Bicycle wall hook
Item no: 2498549
1 Intended use
The product is a bicycle wall holder/hook. Use the product to hold or hang bicycles. Do not
use the product to hang other objects than bicycles or for physical exercise. The product
must be installed permanently on a suitable surface.
If you install the product outdoors, it must be protected from water, rain, and snow.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the installation instructions carefully and store them in a safe place. Make this product
available to third parties only together with the installation instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery contents
■
Wall hook
■
Wall protector with adhesive tape
■
4x Screws and dowels
■
Installation instructions
3 Latest product information
Download the latest product information at
code shown. Follow the instructions on the website.
4 Symbols in this document
The symbol warns of hazards that can lead to personal injury. Read the informa-
tion carefully.
The symbol warns of dangerous voltage that can lead to personal injury by elec-
tric shock. Read the information carefully.
5 Safety instructions
Read the installation instructions carefully and especially observe the
safety information. If you do not follow the safety instructions and informa-
tion on proper handling, we assume no liability for any resulting personal
injury or damage to property. Such cases will invalidate the warranty/guar-
antee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
5.2 Handling
■
Sharp edges can result in cuts. Wear protective gloves while handling or installing the
product.
■
Moving parts can trap body parts. Keep fingers and other body parts away from moving
parts.
5.3 User requirements
■
The installation requires specialist knowledge. If the product is installed incorrectly, it can
fall down and cause serious personal injuries. Instruct a specialist to install the product if
you do not have the necessary knowledge.
■
It may be difficult to hold and install the product at the same time. The product can fall
down and cause injury. Ask a second person for help with the installation.
5.4 Drilling
When penetrating the surface (example: drilling or inserting fasteners), make
sure no cables or pipes are damaged. Inadvertently penetrating electric cables
causes the life-threatening danger of an electric shock! Check for concealed
wires and pipes before drilling or inserting fasteners.
5.5 Installation location and surface
■
The product protrudes from the installation location. Passers-by may bump against the
product and injure themselves. Select an installation location that reduces the risk of ac-
cidents.
2
www.conrad.com/downloads or scan the QR
■
Unsuitable installation surfaces can cause the product to fall down and result in serious
personal injury. Select an installation surface that can permanently withstand the com-
bined weight of the product and the load.
5.6 Installation materials
■
Wrong installation materials can cause the product to fall down and result in injury. Se-
lect installation materials including screws, wall plugs, bolts, and studs that are suitable
for the installation surface and that can withstand the combined forces of leveraging ef-
fect, weight of the product, and load.
5.7 Do not overload
■
Overloading can cause the product to fall down or break and cause injury. Never exceed
the maximum permissible load given in the product specifications.
5.8 Check for loose components
■
Screws and bolts can become loose over time. The product can fall down and cause in-
jury. Check all screw fastenings at least every 3 months and tighten them if loose.
6 Usage
max. 16 kg
7 Technical data
Wheel width.................................... max. 55 mm
Loading........................................... max. 16 kg (bicycle hangs)
Dimensions (W x H x D) (approx.) . 170 x 350 x 65 mm
Weight (approx.) ............................ 425 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2498549_V1_0222_jh_mi_en pj-id: 9007199685009035-1 i/o: I2/O1 edtl-id: en
max. 25 kg
max. 25 kg (bicycle touches the ground)