Available Options - hc-cargo 161949 Bedienungsanleitung

Protections (Automatically show up when triggered)
<!>
Pre-Alarm : Low Voltage, Overload, Overtemp
(X)
Shutdown : Low Voltage, Overload, Overtemp, Short Circuit, High Voltage
Example:
Settings
On the main page, press and hold the display button for 5 seconds to switch to the settings page. On
the settings page, click the display button to pick which settings to be changed. Once the setting is
picked, press and hold the display button to change the setting to different values.

Available options:

Eco Mode: ON/OFF
Fan: AUTO/ON
Menu Flow: ( Display Button)
Click to
switch pages
5. Installation
Connect Battery (CAUTION: DO NOT REVERSE INPUT)
Use the RED battery cord to connect from (+) of the positive terminal to (+) of the DC battery.
Then, Use the BLACK battery cord to connect from (—) of the negative terminal to (—) of the DC battery.
Connect Chassis Earth
The chassis earth lug should be connected to an earth point, which will vary depending on where the
power inverter is installed. In a vehicle, connect the chassis ground lug to the chassis of the vehicle.
In a boat, connect to the boat's ground system. In a fixed location, connect to earth.
6. Operation
Power On
When connected to any appliance, be sure to turn on the inverter first. Then, turn on the power
switch of the appliance.
Energy-Saving Mode
Under energy-saving mode, the inverter will detect AC output every 4~6 seconds thus causing a 4~6
seconds delay to start up. When using power tools such as drill, electric saw, mower, ...etc., we
suggest switching to normal mode for better response time.
Hz: 50/60Hz
Buzzer: ON/OFF
Main
Hold 5 secs to
enter settings
Click to select
setting
Timer OFF: 1hr/2hr/3hr/6hr/12hr/24hr
V out: 220/230/240V (110/120/127V)
Restart Power to
return to mail page
Hold to
make
changes
Complete
3
Vedpak 236_Version 1_08.2021