Nvidia NVLINK BRIDGE Schnellstartanleitung Seite 4

Instructions
>
Install the first NVIDIA Ampere architecture-based GPU into
the primary PCI Express x16 slot on the motherboard.
>
Install the second NVIDIA Ampere architecture-based GPU into
the adjacent PCI Express x16 slot.
>
Connect your NVLink Bridge into the labeled NVLink ports
on the two GPUs.
Note: To check the status of your NVLink for each of the
two GPUs, use the following commands:
nvidia-smi nvlink -i 0 -s
nvidia-smi nvlink -i 1 -s
If configured correctly, the output should be the
same for both GPUs:
Link 0: active
Link 1: active