En - Software Manual - Genesis RADON 800 Softwarehandbuch

EN – SOFTWARE MANUAL
INSTALLATION
1. Connect the Genesis Radon 800 headphones via USB cable to your computer*
2. Install the software available at www.genesis-zone.com
3. Open the installation folder and then double-click on the Genesis Radon 800 setup.exe icon
4. Follow the directions to install the software
5. When the installation is completed successfully, the software icon will be displayed on the taskbar
6. Double-click on the icon to display the interface with settings
* Software supports headphones only when connected to a PC via USB cable
To activate the speaker, make sure the speaker icon is selected.
To access the function menu, right-click the device icon. This will provide additional functions and sound effect.
SPEAKER
Volume control
Allows you to set the right and left speaker balance and volume control
2 |
Sample rate
Allows you to select one of two sample values
Equalizer
Allows you to adjust specific frequency bands and select the appropriate effect. To save a profile, enter its name in the „Please
input preset name" and then click on the floppy Save icon. Several profiles can be saved at the same time. Saved profiles can be
selected from the drop-down list above the name entry window
| 3