Type Plate; Mounting The Water Heater - Waeco Mobitherm MWH-020/N Montage- Und Bedienungsanleitung

MWH-20-N_60-N_EB_10s.book Seite 27 Montag, 5. Februar 2007 5:57 17
Mobitherm
6.1

Type plate

The type plate contains the following information:
Type designation
Capacity
Voltage (V)
Power (W)
Material
Installation type (vertical or horizontal)
Maximum operating pressure in N/cm²
kg/cm² (safety valve setting)
7

Mounting the water heater

These mounting and operating instructions describe how to mount the
appliance on a boat. It is fitted in a caravan, for example, in the same way.
Caution!
a
If you connect the water heater to the cooling system of an engine,
always follow the engine manufacturer's recommendations.
Observe the following instructions when mounting the water heater:
Caution
e
Always take out the power plug before taking off the plastic cover.
If you have any questions regarding installation, service and repair, or in
the event of a complaint, contact your dealer first.
The water heater can be mounted vertically or horizontally.
Install the water heater somewhere where it is protected from damp and
from splashing water.
It should be as close to the engine and connections as possible.
Mount the water heater so that all the connections, the safety valve and
the heating cartridge are easily accessible.
Mounting the water heater
27