Troubleshooting - EcoFlow DELTA 2 Bedienungsanleitung

5. Troubleshooting

Indicator
Icon Stays On
If the Alarm Prompt shows on the product LCD screen during use and does not disappear after a
restart, please stop using it immediately (do not try to charge or discharge).
If you require any other assitance, please contact EcoFlow Customer Service.
Icons Flash
USB-A Overload
together
Icons Flash
USB-C Overload
together
Icons Flash High Temperature
Charge Protection
together
Icons Flash High Temperature
together
Discharge Protection
Icons Flash
Low Temperature
together
Charge Protection
Icons Flash Low Temperature
together
Discharge Protection
AC Output
Icons Flash
Overload Protection
together
Icons Flash
Temperature Protection
together
Icons Flash
together
Temperature Protection
Fan Blockage
Icon Flashes
Icons Flash
Car Charger
together
Overload Protection
Icons Flash Car Charger High
together
Temperature Protection
Battery Failure
Problem
Protection
Protection
automatically after the battery cools
automatically after the battery cools
temperature rises above 10°F(-12 ℃ ).
Electrical appliances should be used
(Refer to X-Boost instructions to get
more details about power limitations).
Please confirm whether the fan inlet
AC High
and outlet are blocked, if not, normal
operation will be resumed automatically
after the product temperature drops.
AC Low
Please check if the fan is blocked by
remove the device connected to the car
Solution
Resume normal operation by
removing the electrical device
connected to the USB-A port.
Resume normal operation by
removing the electrical device
connected to the USB-C port.
Charging can be resumed
down.
The power supply can be resumed
down.
Charging can be resumed
automatically after battery
temperature rises above 41°F(5 ℃ ).
The power supply can be resumed
automatically after the battery
Normal operation will be resumed
automatically after you remove the
overloaded device and restart the
product.
within rated power.
Normal operation will be resumed
automatically after the product is
used at optimum environmental
temperatures.
foreign materials.
The product will resume normal
operation automatically after you
charger.
After the product cools down,
it will resume normal operation
automatically.
Contact EcoFlow Customer Service
13