Ledvance NEON DIGITALFLEX 3M REMOTE RGB IP44 Bedienungsanleitung Seite 3

NEON DIGITALFLEX
Do not connect the rope
light to the supply while it
is wound onto a reel.
w/ww
IC Set Auto
CS
C3 Flash
Jump
C7
C16 Meteor
3
1
Do not use the lightstrip when
covered or recessed into
a surface.
1
Increase/Decrease
Buttons increase/decrease LED brightness in static mode
Buttons increase/decrease speed in dynamic mode
The number of IC is added or subtracted in IC SET mode
OFF/ON
On/o button: click once to turn on the LED controller;
Click once again to turn o the LED controller;
White/Warm White
w/ww
Click white light; Click warm white;
IC setting up mode
Press this key to enter the IC Set mode. (Press any other mode key to
IC Set
exit the IC Set mode) You can optional increase/decrease key to add
or reduce the number of ICs to change the LED light length of LED strip.
Static color selection
Press this key to switch between red, green, blue, yellow, purple,
CS
cyan, cool white and warm white... amount 8 Static colors
3 colors selection
C3 Press this key to switch between red, green, blue, 3 static colors.
7 colors selection
Press this key to switch between red, green, blue, yellow, purple,
C7
blue, white amount 7 Static colors
16 colors selection
Pressing this key to switch between red, green, blue, yellow, purple,
C16
cyan, white, orange, dark yellow, light yellow, light green light blue, dark
blue, sky blue, blue purple, magenta, 16 static colors.
Curtain-up mode
The color when running CS/C3/C7/C16 key mode, push from the
middle to both sides to form the dispersion e ect.
Collect e ect mode
The color when running CS/C3/C7/C16 key mode, Promote the
closing e ect from both sides to the middle.
Flowing water e ect (left)
Running CS/C3/C7/C16 button mode, each color flows to the left.
Flowing water e ect (Right)
Running CS/C3/C7/C16 button mode, each color flows to the right
2
The string of lights may not
be operated within the
packaging.
2
White light refresh water e ect (left)
The color when running CS/C3/C7/C16 key mode flows to the left
on the white light.
White light refresh water e ect (Right)
The color when running CS/C3/C7/C16 key mode flows to the
right on the white light.
Refresh ground color(left)
Run the CS/C3/C7/C16 button mode. The background color is the
previous color and swipe left in sequence
Refresh ground color(Right)
Run the CS/C3/C7/C16 button mode. The background color is the
previous color and swipe right in sequence
Meteor drops of water(left)
The color running under the CS/C3/C7/C16 button mode, drop 8
ICs / 8-level grayscale (the speed is not adjustable here). After dropping
these 8 ICs, slide to the left like a meteor (the speed is adjustable here).
Meteor drops of water (Right)
The color running under the CS/C3/C7/C16 button mode, drop 8
ICs / 8-level grayscale (the speed is not adjustable here). After dropping
these 8 ICs, slide to the right like a meteor (the speed is adjustable here).
Automatic
Auto
All pattern loops
Circulation of running water mode
Running CS/C3/C7/C16 button mode to circulate the flowing water
to the left and right.
Gradual change
Flash
Running CS/C3/C7/C16 button mode gradual change e ect
Jump
Jump
Running CS/C3/C7/C16 button mode jump e ect.
The meteor circulates around
When running CS/C3/C7/C16 button mode, the meteor swipes to
Meteor
the left and right (drip) circulation e ect.
3
Do not open the lightstrip.
3