Remote Control - Blaupunkt 5SL92500 Bedienungsanleitung

4. CONTROLS
Key Key pressing Function
L Short
T1 Long with hood
down
Short with hood
down
Short with hood up The hood turns off.
Short with hood up The hood stops.
The electronics recognise two types of anomalies and provide the relevant
indication:
T1 Led
Slow Exceeding of the current absorption threshold:
flashing
In the event of an overload condition, the anomaly is signalled by the flashing of LED T1 on the keypad every 2
seconds. Check that there are no obstacles during the movement of the hood. This signal remains active until a
new hood opening/closing command is given.
Fast flash- Intervention of the safety micro during opening:
ing
In case of intervention of the safety micro, the anomaly is signalled by LED T1 which will flash quickly (every
250ms) meaning that the hood has passed the limit switch.
Contact Technical Assistance!
During this anomaly it is always possible to access the hood functions (lights and motor) and, if the motor is on,
the LED T1 will continue to flash, indicating that the anomaly is still present.

5. REMOTE CONTROL

• This appliance can be controlled by
means of a remote control.
Hood open:
The motor turns off and the hood starts to move
upwards.
Hood closed:
When pressed once, the hood moves down;
when pressed again, the hood stops. This condi-
tion should be considered as hood open even if it
is not completely open; all functions are enabled.
When the movement has ended, the motor starts
at speed 2.
12
Turns the lights on/off at the maximum intensity.
It lifts the hood
Turns the hood on/off.
The hood turns on at the second speed.
6. ADDITIONAL
INSTRUCTIONS FOR
THE INSTALLER
B
Procedure for intervening in the case
of faulty movement
• Check that the fuse is correctly inser-
ted and not blown; for any replace-
ment open the lighting unit and un-
screw the fuse holder, replacing it
with one of the same characteristics
(ref.B).
LED
-
On/Off
On/Off
On/Off
On/Off