Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Cut the materials to size.
Stainless materials are
strengthened during
screwing in. Oil the stated
thread before screwing in.
1.2. Intended use
This accessory is intended exclu-
sively for installation on the Sortimo
TopSystem.
This product has not been tested for
other purposes. Contact Sortimo In-
ternational GmbH, if you intend to
use it for any other purpose.
2. Installation
2.1. Safety instructions
W A R N I N G
Danger of injury caused by
incorrect torque
If the screw connections are not
tightened to the relevant torque
levels, this may lead to severe to
fatal injuries in the event of heavy
braking or an accident.
▶ Comply with the stated torque
levels.
2.2. Tools required
• Torque wrench 1-25 Nm,
• Hexagon tool head SW 10,
• Tool head Torx 30,
• Folding rule,
• Stable ladder,
• Carpet knife.
© Sortimo International GmbH
MA 00004 | 2022-07-28
5
Werbung
Inhaltsverzeichnis
