Technical Data; Mounting And Operation; Initial Operation - Bosch GlassVAC Originalbetriebsanleitung

(4) Battery charge-control indicator
(5) On/Off switch
(6) Cover, micro USB port
(7) Dirty water tank
(8) Drain plug to empty dirty water tank
(9) Spray applicator bottle
(10) Trigger
(11) Spray nozzle
(12) Spray applicator head 110 mm
(13) Spray applicator head 276 mm
(14) Microfiber cloth 110 mm
(15) Microfiber cloth 276 mm
(16) Micro USB cable
a)
(17) Charger
(18) Micro USB socket
(19) Replaceable wiper blade 133 mm
(20) Suction head 133 mm
a) country specific
The accessories shown or described are not part of the
standard delivery scope of the product. A complete overview
of accessories can be found in our accessories program.

Technical Data

Cordless Window Va-
cuum
Article number
Rated power
Protection class
Weight according to
EPTA‑Procedure 01:2014
Serial number See serial number (nameplate)
on machine
Recommended ambient
temperature during char-
ging
Permitted ambient tem-
perature during operation
A)B)
and storage
Battery
Rated voltage
Capacity
Number of battery cells
A) Limited performance at temperatures < 0 °C
B) The machine will not switch on at a temperature below −5 °C.
Charger
Article number
Bosch Power Tools
Charger
Charging current
Charging period (battery
discharged)
Weight according to
EPTA‑Procedure 01:2014
Protection class
A) country specific
For further information, please see www.bosch-do-it.com/
ecodesign

Mounting and Operation

Action
Product Features
Delivery scope
Charging the Battery
Connect/disconnect the suction
head (large/small)
Filling the spray applicator
Mounting the applicator head
Attaching the microfiber cloth 110
mm
Mounting the applicator head 276
GlassVAC
mm
Attaching the microfiber cloth 276
3 600 HB7 0..
mm
W 15
Dismounting the applicator head
IP X4
Work procedure
kg 0.7
Emptying the dirty water tank
Cleaning the machine
Detaching the microfiber cloth
110 mm
°C 0... +45
Cleaning the microfiber cloth
Accessories
°C -20... +50

Initial Operation

Li-Ion
Note: The battery is supplied partially charged. To ensure full
battery capacity, completely charge the battery in the bat-
V 3.6
tery charger before using for the first time.
Ah 2.0
The lithium-ion battery can be charged at any time without
1
reducing its service life. Interrupting the charging procedure
does not cause damage to the battery.
The battery is protected against deep discharging.
When the battery is discharged, the machine will stop.
Battery Charging (see figures A and C)
EU 2 609 120 713
Note: The micro-USB port (18) for connection of the micro-
USB cable (16) is in the handle.
UK 2 609 120 718
English | 9
A 1.0
min 130
A)
kg 0.03
/ II
Figure Page
A 133
B 134
135
C
D 135
E 136
F 136
137
G
H − I 138 − 139
I 140
J − K 140 − 141
L 142
M 142
F 016 L81 778 | (16.08.2022)