Markusson Robojolly RJ12 Original-Gebrauchsanleitung Seite 23

Operation
4 mm
1 . Set the grinding wheel switch to ON to start
grinding motor .
2 . Set the chain pusher switch to ON to start the
feeding of the chain and the movement of the
grinding head . The sharpening will start after
this .
3 . Wait until the machine has sharpened all the
links until the stopper . When the stopping
clamp is reached, the chain feeding and the
grinding stops .
23 RJ12_v1_EN_220223
4 . Set the grinding wheel switch to OFF .
5 . Set the chain pusher switch to OFF .
6 . Lift the grinding head to its most upright
position .
7 . Remove the chain .
8 . To turn off the power to the machine, press the
stop button .
CAUTION Clean the machine daily . To prevent
that it breaks, remove grinding dust every day . Use
a vacuum cleaner, brush or similar to clean the
machine .
RJ12