Space Requirement; Electrical Connection - Scandomestic WB145W Bedienungsanleitung

Space requirement

Space Required In Use
W1 / mm D1 / mm
Model (Product (Product
Width) Depth)
WB145W 705 545
WB202W 905 545
WB302W 1090 700
Remark: D1 doesn't contain the external handle size.
Placement
Install this appliance at a location where
the ambient temperature corresponds to
the climate class indicated on the rating
plate of the appliance:
For refrigerating appliances with climate
class:
- extended temperate: 'this refrigerating
appliance is intended to be used at am-
bient temperatures ranging from 10°C
to 32°C (SN);
- temperate: 'this refrigerating appli-
ance is intended to be used at ambient
temperatures ranging from 16°C to
32°C (N);
- subtropical: 'this refrigerating appli-
ance is intended to be used at ambient
temperatures ranging from 16°C to
38°C (ST);
- tropical: 'this refrigerating appliance is
intended to be used at ambient tem-
peratures ranging from 16°C to 43°C (T);
H1 / mm C1 / mm
(Minimum (Minimum
Heigth) Clearance)
1450 100
1450 100
1600 100
Location
The appliance should be installed well
away from sources of heat such as radia-
tors, boilers, direct sunlight etc. Ensure
that air can circulate freely around the back
of the cabinet. To ensure best performance,
if the appliance is positioned below an
overhanging wall unit, the minimum dis-
tance between the top of the cabinet and
the wall unit must be at least 100 mm. Ide-
ally, however, the appliance should not be
positioned below overhanging wall units.
Accurate leveling is ensured by one or
more adjustable feet at the base of the
cabinet.
Warning! It must be possible to disconnect
the appliance from the mains power supply;
the plug must therefore be easily accessi-
ble after installation.

Electrical connection

Before plugging in, ensure that the voltage
and frequency shown on the rating plate
correspond to your domestic power supply.
The appliance must be earthed. The power
supply cable plug is provided with a contact
for this purpose. If the domestic power
supply socket is not earthed, connect the
appliance to a separate earth in compli-
ance with current regulations, consulting a
qualified electrician.
The manufacturer declines all responsibil-
ity if the above safety precautions are not
observed.
This appliance complies with the E.E.C. Di-
rectives.
Daily Use
First use
Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accessor
es with lukewarm water and some neutral
soap to remove the typical smell of a