Package Contents - Yealink Wireless Presentation Pod WPP30 Schnellstartanleitung

1

Package Contents

WPP30
2
Pair WPP30 to the Endpoint
WPP30 supports different Yealink endpoints. The pairing
methods of different endpoints are different. For details,
please refer to support.yealink.com.
If you purchase one of above endpoints and WPP30 together,
they are already paired. Just connect the WPP30 to your
computer for sharing content.
If you purchase the WPP30 separately, you need to pair
endpoint and WPP30 manually.
To pair endpoint and WPP30 manually:
1. Connect the WPP30 to the USB-A port on the endpoint.
2. Disconnect the WPP30 after the monitor prompts "
Wireless Presentation Pod is Paired successfully ".
3
Start or Stop Sharing Content
1. Connect the WPP30 to the USB-A/USB-C port on your
computer.
Wait Yealink Wireless Presentation Pod software pops up.
2. On the WPP30, press the presentation button to share full
screen.
Press the presentation button again to stop sharing.
E N G L I S H
Quick Start Guide
Yealink Wireless Presentation
Pod software