Technical Data; Rating Plate; Energy Efficiency - Progress Pes6061E Benutzerinformation

Problem
Residual heat indicator does not
come on.
There is a dark area on
the multiple zone.
8.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre. Give the data from the rating
plate. Make sure, you operated the hob
correctly. If not the servicing by a service

9. TECHNICAL DATA

9.1 Rating plate

Model PES6061E
Typ 60 AAD 65 ZO
Ser.Nr. .................
PROGRESS
9.2 Cooking zones specification
Cooking zone
Left front
Left rear
Right front
Right rear
For optimal cooking results use cookware not
larger than the diameter of the cooking zone.

10. ENERGY EFFICIENCY

10.1 Product information according to EU 66/2014
Model identification
Possible cause
The zone is not hot because it
operated only for a short time or
the sensor is damaged.
It is normal that there is a dark
area on the multiple zone.
Nominal Power (Max heat set‐
ting) [W]
750 / 2200
1200
1800
1500 / 2400
Remedy
If the zone operated sufficiently
long to be hot, speak to an Au‐
thorised Service Centre.
technician or dealer will not be free of charge,
also during the warranty period. The
instructions about the Service Centre and
conditions of guarantee are in the guarantee
booklet.
PNC 949 594 403 02
220 - 240 V 50 - 60 Hz
Made in Germany
7.6 kW
Cooking zone diameter [mm]
120 / 210
145
180
170 / 265
PES6061E
ENGLISH 9