Operation; Remote Control Panel "Mc180; Legend - CBE ENERGY LINE BATTERY DUO SYSTEM BDS180 Bedienungsanleitung

REMOTE CONTROL PANEL "MC180"

1
Built-in fixing

LEGEND

1) Blue service battery "1" operation status LED.
2) Blue service battery "2" operation status LED.
3) Yellow "manual" mode LED.

OPERATION

Press and hold (for 3 seconds) the button, ref. 4, to switch
the operating mode of the BDS180 from "automatic" to
"manual" and vice versa.
If the yellow LED, ref.3, is on, it means that the "manual"
mode has been activated.
3
2
4
figure 3
Wall fixing
4) Select button.
5) BDS180 connector (the MC180 is supplied with a
6m cable)
When the device is set to "manual" mode, press briefly
the button, ref. 4, to switch the selection between battery
"1" and battery "2".
5
with "BMAD" spacer
[optional]
EN
21