Connecting To A Power Supply - AgfaPhoto Realiview ARL11XL Benutzerhandbuch

EN

CONNECTING TO A POWER SUPPLY

The device must be used with a DC 5V power supply.
Warning: Please make sure the voltage connected is correct and stable, if you use
anything higher or lower than DC 5V, the ring light may not work as intended, stop
working or even get damaged.
NOTICE
Please do not continuously operate over six hours. Keep the device away from children
under 12 years of age. Do not stare at the strong light for a long time.
Don't let the product get exposed to rain or moisture.
Before cleaning the device, make sure the device is turned off.
Use a dry or slightly damp rag for cleaning, any kind of chemicals or corrosives must not
be used.