AgfaPhoto Realiview ARL11XL Benutzerhandbuch Seite 3

INSTALLATION
To deploy the feet of the tripod, loosen the locking knob near the bottom, open the feet of
the tripod and tighten the locking knob to secure the position.
Attaching the 11" ring light to the tripod
Rotate the ring light's base onto the tripod's stud until secure.
Adjusting the tripod's height
You can increase or decrease the height of the
tripod at four different points, each point has a flip
lock you can open and close.
To adjust the length of one of the expendable
parts, open the corresponding flip lock, adjust the
length and close the flip lock.
Adjusting the ring light's angle
You can rotate the ring light horizontally and
vertically.
To rotate it horizontally, rotate the wheel placed at
the tip of the tripod to the left or to the right.
To rotate it vertically, loosen the angle tilt knob,
position to the desired angle and retighten the
knob.
EN