AgfaPhoto Realimove AC9000 Bedienungsanleitung Seite 4

EN
INSTRUCTIONS
1. Inserting a micro SD card
You cannot use the camera
without first inserting a micro SD
card in the corresponding slot on
its left side. Preferably choose
a well-known brand micro SD
card with up to 128GB storage
capacity having been formatted
on a computer before use.
Note: basic memory cards do not
guarantee the proper functioning
of the camera.
2. Installing and removing the
battery
A. In accordance with the direction
of the arrow, slide battery
compartment cover to open
access to its slot.
B. In accordance with the direction
of the positive and negative
symbols marked on the battery,
insert the battery into the slot.
With the correct polarity until it
is seated and sounds click.
3. Battery charging
A. Plug in the camera with the USB
cable to a computer or a power
adapter for charging.
B. The camera can also be charged
in a car by plugging it into a USB
car charger.
4. Power on and off
A. To switch on the camera, press
the Power key for about 3
seconds until the screen lights up.
B. To shut down the camera, press
the Power key for about 3
seconds until the screen turns off.
5. Mode switching
Once the camera is on, press the
Mode key (same as Power one) to
successively move from a mode to
another: video / photo / playback
/ settings. The icon in the top left
corner indicates the current mode
6. Video Mode
In video mode, long press the Ok
button to display the different
video recording functions. Short
press the OK Button to start
recording. Press OK again to stop
recording and save the file.
7. Photo Mode
In photo mode, long press the Ok
button to display the different
photo taking functions. Short
Press «OK» to take a picture.
8. Camera settings and playback:
Press the Mode button to switch
to the settings interface, press the
Mode or the up/down buttons to
select Playback Mode, VideoSetup
or PhotoSetup, and press "OK".
A. Playback mode
In playback mode, press the up/
down buttons to select Video
Gallery, Photo Gallery, Delete, or
Exit.
Select any icon and press OK to
open the corresponding submenu.