Installation And Removal Of The Battery Pack In/From The Device - HammerSmith MultiTool M32717 Gebrauchsanweisung

Avoid this coming into contact with the skin under
all circumstances. If you accidentally come into
contact with the liquid, rinse it off immediately
with water. If the liquid comes into contact with
the eyes, seek medical attention immediately.
Liquids that leak from batteries can cause skin
irritation and burns.
• This device is designed for household and
personal use only.
• Do not try to repair the device yourself, and
ensure that repairs are only ever carried out by an
authorized specialist dealer.
• Before each use of the battery charger, check
that the power cord and plug are in good
condition. Always make sure the cable is placed
in a safe area.
• Never use the battery charger power cord
incorrectly, always keep it away from sources of
heat, liquids, sharp objects and moving parts.
Never use the cord to carry, drag or unplug the
Hammersmith MultiTool. Replace damaged
cables immediately.
• These safety instructions, the instruction manual
and other accompanying safety information
should be kept in a safe place, together with
the Hammersmith MultiTool. Refer to them on a
regular basis and use them to train others when
they use or borrow the Hammersmith MultiTool.
The manual and other instructions should be
passed on with the device to the new owner if it
is resold.
CHARGING, INSERTING AND REMOVING THE
BATTERY PACK (see Figure 1/A-C)
The quick-charge battery station is designed in
such a way that the battery set can be charged
within an hour, although this depends on the
respective battery set.
1. Plug the charger into a suitable socket before
inserting the battery pack.
2. Insert the battery pack into the charger.
3. A red light indicates that the battery pack is
being charged.
4. A green light indicates that the charging process
is complete. The battery pack is now fully
charged, and can be used or left on the charger.
Charge the battery set immediately after use to
avoid shortening the service life of
the battery. In order to extend the service life,
make sure that the battery pack is
never completely empty. We recommend charging
the battery pack after each use. (see Figure 2)
If you want to know how much battery capacity
remains in the battery pack during use, press the
battery level indicator button. (see Figure 3)
LEAVING THE BATTERY PACK CONNECTED TO
THE CHARGER
The battery can be left in the charger; in this case
the LED display is lit green continuously. The charger
keeps the battery pack in a fully charged state.
INSTALLATION AND REMOVAL OF THE BATTERY
PACK IN/FROM THE DEVICE
WARNING: Make sure that the rotational
direction switch is in the middle position to
avoid triggering the switch while removing
or installing the battery pack.
INSTALLATION
Slide the battery pack into the device until it clicks
into place. Make sure that the battery pack is correctly
positioned and fully engaged. (see Figure 4/A+B)
REMOVAL
Press the battery pack release button and pull the
battery out of the device.
This symbol means that such
electrical equipment or batteries
must not be disposed of with normal
household waste. You are legally obliged to hand in
such items - free of charge - to a public collection
point or distributor-created collection point for the
recycling of electrical devices and expired bulbs
and batteries within the scope of the Electrical and
Electronic Equipment Act that are not encapsulated
by or fixed into the appliance, and can be removed
or separated from the appliance non-destructively,
for disposal at the end of their service life. Use
rechargeable batteries instead of single-use
batteries wherever possible. The recovery and
7