Dab/Dab+ Radio - Fenton NASHVILLE Vintage Player Bedienungsanleitung

Listening to radio pre-sets
1. Press MODE to select FM or DAB/DAB+.
2. Press PRESET, then press the
3. Press ENTER to confirm your choice.

DAB/DAB+ RADIO

1. Press MODE until "DAB" appears on display to select the DAB mode.
2. The unit will start a scan for DAB/DAB+ stations automatically, if it's the first time of use. "Scanning" will appear on the
display.
3. When the scan is complete, the unit will select the first available station and will start to play automatically. Stations will be
listed in numerical and then alphabetical order by default.
Note: When the DAB/DAB+ radio station list is stored, it will not search automatically again.
Press SCAN to search and list station.
4. Rotate the TUNING knob to select a station.
5. When the desired station is chosen, press ENTER to confirm. There will be a short delay while your radio tunes into your
selected station.
Note:
- If no broadcasts are found by DAB/DAB+ scan, "No DAB Station" appears on the display.
- For a better reception, extend the telescopic antenna.
- During the search operation, the sound level is automatically muted.
ALARM/SLEEP SETTINGS
Setting the alarm
1. Press MENU/INFO in DAB or FM mode.
2. Rotate the TUNING knob to select <System>. Press ENTER to enter this option.
Rotate the TUNING knob to select <Alarm>, Press ENTER to enter this option.
Or, press the ALARM button in STANDBY mode.
3. Rotate the TUNING knob to scroll between <Alarm 1 Setup> and <Alarm 2 Setup>.
4. Press the ENTER button to select the <Alarm 1 set up>.
5. The hour digits will flash. Use the TUNING knob to set the hour. Press the ENTER button to confirm.
Now the minute digits will flash. Use the TUNING knob to set the minutes. Press the ENTER button to confirm.
6. Rotate the TUNING knob to set the duration of the alarm (15-30-45-60-90), press ENTER to confirm. When the duration of
alarm has been reached, the alarm will stop.
7. Rotate the TUNING knob to select Buzzer, DAB or FM to wake up to. Press ENTER to confirm.
8. Rotate the TUNING knob to specify one of the following alarm frequency options: "Daily", "Once", "Weekends" and
"Weekdays". Press ENTER to confirm. Then adjust the volume level.
9. The alarm status will be showed. Rotate the TUNING knob to set the alarm, press ENTER to confirm. ''Alarm saved'' will
show on the display.
Stopping the alarm
1. Alarm repetition
Press SCAN. The alarm stops and will sound again 9 minutes later (snooze).
2. Alarm stop
Press STANDBY/ON to stop the alarm.
3. Alarm cancellation
Please refer to 1-9 steps of ''setting the alarm''.
Sleep function
1. Press MENU/INFO. Rotate the TUNING knob to select ''system'' and press ENTER to confirm this option.
2. Rotate the TUNING knob to select ''sleep". Press ENTER to confirm this option.
3. Rotate the TUNING knob to set the sleep timer (off-15-30-45-60-90 minutes).
4. Press ENTER to confirm.
LISTENING TO THE CD DISC/MP3
1. When the unit is on, press CD/USB button or MODE button until "CD" appears on display to select the CD mode.
2. Press OPEN/CLOSE button to open the disc tray, the display shows "OPEN". Insert a disc with label side facing up. Press
OPEN/CLOSE button again to close the disc tray.
3. The display will show "CD--READING" for a few seconds, then playback starts automatically.
4. Select desired track with PREV/NEXT button.
5. Press PLAY to suspend playback momentarily. Press PLAY again to resume playback.
6. Press STOP to stop playback.
Repeat playback
Press REPEAT to select one of the following playback modes: Single repeat, repeat album or repeat all.
Random playback
Press RANDOM to play randomly, press RANDOM again to cancel.
◄/►
buttons to select your desired station.
5