Remote Control - Argo POLIFEMO Gebrauchsanleitung

Fan speed display
1 (low)- 2 (medium) - 3 (high)
Fan mode display
(Sleep, Natural)
The remote control has six membrane buttons whose functions are identical to those on the control panel (already illustrated
in detail).
HOW TO INSERT / REMOVE THE REMOTE CONTROL BATTERIES (refer to the diagram below)
Open the battery cover on the back of the remote control (press and pull the cover).
Place the battery inside the cover, making sure the polarity is correct.
Slot the cover back into position on the remote control.
Use Lithium/Manganese button cells, model no. CR2032 -3 V, compliant with Battery Directive no. 2006/66/EC (supplied
with the remote control).
INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EUROPEAN
DIRECTIVE 2006/66/EC
Please replace the battery when its electrical charge has been exhausted: at the end of its useful life, it must not
be disposed of together with unsorted waste. It must be must be delivered to appropriate separated waste
disposal plants or to dealers that provide a similar service. Separate waste disposal of batteries prevents
potential negative effects on the environment and human health resulting from inadequate disposal, and also
allows the materials from which it is made to be recovered and recycled in order to achieve significant savings in
terms of energy and resources. The separate disposal obligation is underlined by the crossed-out dustbin
symbol appearing on the battery. Illegal disposal of the product by the user shall result in the application of
administrative sanctions as defined by current regulations.
V 11/18
LED DISPLAY

REMOTE CONTROL

START/
SPEED
TIMER
COOLER/
HUMIDIFIER
Cooler/Humidfier mode display
Timer display
(0.5 - 7.5 hrs)
OFF
SWING
MODE
15