Troubleshooting Guide - New One AR275BT Benutzerhandbuch

- Do not put anything other than a micro SD card to micro SD card slot of this unit. Other objects may
damage the card mechanism.
- The USB socket must not be connected to the computer directly, for that may damage the unit.
- There are many USB devices and micro SD card in the market. We cannot guarantee to support all
different models. Please try another USB device and micro SD card if your device is not supported.
- The unit might not support all the multimedia files stored in USB or micro SD card because it includes
some special playback procedure which might not be compatible with the procedure of this unit.
LISTENING TO AUXILIARY SOURCE
1. Connect your auxiliary source (e.g. mp3 player) to the AUX IN jack.
2. Press button to turn the unit on.
3. Press MOD/CLK to select AUX mode.
4. Start playback from your auxiliary source.
5. Adjust the volume to desired level.
6. Disconnect your auxiliary source from the Aux in jack, press MOD/CLK button to select other source.
Hereby, NEW ONE S.A.S, declares that this NEW ONE AR275BT is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may
be consulted at www.new-one.eu.
MAINTENANCE
Precaution
- Clean the front panel with a soft cloth, or damp chamois leather. Never use solvents.
- Do not expose to rain or water;
- Do not drop or apply shock.
- Make sure that you keep your set away from high temperatures.
- The use of apparatus in moderate climates.
- Do not be exposed to dripping or splashing, and that no object filled with liquids, such as vases, shall
be placed on the apparatus.
- No naked flame sources such as lighted candles should be placed on the apparatus.
Replacing the Fuse
Make sure the amperage matches the specified value when replacing the fuses. If the fuse is blown,
check the power connection and replace with a new one. If the same problem occurs, it would be
subjected to the malfunction in-house. In such cases, please consult the nearest service dealer.
AR-5000A IB NEWO 001 REV0.indd 10
GB - 7
TROUBLE SHOOTING GUIDE
Symptom Cause
The car ignition switch is not on.
No power.
The fuse is blown.
Volume is in minimum.
No sound.
Wiring is not properly connected.
The operation keys The built-in microcomputer is not
do not work. operating properly.
The radio does not The antenna cable is not connected.
work. The automatic
radio station selection
The signals are too weak.
does not work.
Solution
If the power supply is connected to
the car accessory circuits, but the
engine is not moving, switch the
ignition key to "ACC".
Replace the fuse.
Adjust volume to a desired level.
Check wiring connection.
Press the RES button.
Front panel is not properly fixed
into its place.
Insert the antenna cable firmly.
Select a station manually.
GB - 8
2022/3/3 16:27:20