ProfiCare PC-HR 3053 Bedienungsanleitung, Garantie Seite 50

WARNING:
• Disconnect the hand-held unit from the power supply before cleaning.
• Do not immerse the parts into water.
CAUTION:
• Also do not clean the appliance under running water! The electronics could get
damaged.
• Do not use a wire brush or other abrasives.
• Do not use sharp or abrasive cleaning agents.
Shaving Head with Shaving Foils
CAUTION:
The shaving foils must not be cleaned with the brush!
1. Switch of the shaver.
2. Press the shaving head button.
3. Clean the inside and the outside of the shaving head with the brush.
Cleaning the Handset and the Power Cord
• You may wipe these parts with a damp cloth.
• Use slightly soapy water to remove spots.
Maintenance and Replacement
• Clean the shaving head thoroughly once a month. If necessary, use special clean-
ing aids available in specialist shops.
• Lubricate the shaving foils and long hair cutting attachment with a light machine oil
(a few drops suffice).
Replacement of Shaving Parts
To get 100 % shaving performance, replace the shaver parts at least every 18 months
or if the parts show signs of wear. We recommend that you replace the parts as a set.
For replacement parts, please consult your dealer.
50
PC-HR3053_IM_new2
Cleaning
07.07.21