Operation - Lacor 69396 Gebrauchs- Und Instandhaltungsanleitung

1.- Place the 360° heating base (4) on a firm and flat surface. Connect it to a 220V / 50-60Hz
power outlet.
2.- Choose between any of the two whisk accessories supplied:
ACCESSORY
3.- Place the desired accessory on the motor shaft (7).
4.- Fill the milk container (6) taking into account the maximum capacity marks on the table
located just above.
5.- Place the accessory you are not using on the lid holder (1) designed for this purpose
and then close the lid.
6.- Place the body (2) on the 360° heating base (4) and press the ON/OFF button (3) to choose
between one of the 3 different functions:
A.- "Hot Froth" function: Press the ON/OFF button (3) and the red indicator will light up.
The shaft will begin to rotate. After around 100 seconds, the ON/OFF button (3) will
flash red, indicating that the process has finished.
B.- "Cold Froth" function: Press the ON/OFF button (3) for 3 seconds and the blue
indicator will light up. The shaft will begin to rotate. After around 100 seconds, the
ON/OFF button (3) will flash blue, indicating that the process has finished.
C.- "Heat" function: ": Press the ON/OFF button (3) and the red indicator will light up.
The shaft will NOT begin to rotate. After around 100 seconds, the ON/OFF button
(3) will flash red, indicating that the process has finished.
NOTE: This product is designed for NON-professional use. In case of overheating, pour cold
water into the milk container and leave it for a few minutes. Try using it again once it has cooled
down completely.

OPERATION

FUNCTION CAPACITY
Cold froth
Hot froth
Just heat
TIME
(MAX)
115 ml 100 seconds
115 ml 100 seconds
240 ml 100 seconds
33