Package Contents - Avigilon H3-BO-JB Installationsanleitung

Installation

Package Contents

Ensure the package contains the following:
• Avigilon Indoor/Outdoor Junction Box for the HD Bullet
Camera
• Teflon Sealing Tape
• Avigilon HD Bullet Junction Box Mounting Template
• 3/4" NPT closure plug
• 4 screws for attaching the HD Bullet Camera to the
junction box
Mounting the HD Bullet Junction Box
1. Use the Junction Box Mounting Template to drill four mounting
holes into the mounting surface.
2. If you are storing the cables inside the wall, drill the center
hole on the mounting template.
3. Prepare the cable entry holes on the junction box. The
junction box has two 3/4" NPT cable entry holes: one at the
center of the junction box and one on the side.
Cable entry hole
Cable entry hole
1