Risk Of Damage; Checking The Package Contents - Dockin D FINE Bedienungsanleitung

NOTICE

Risk of damage!

Improper handling can cause damage to the D FINE.
Do not place the D FINE on or near hot surfaces (stovetops,
-
heaters etc.).
Do not allow the power cable to come into contact with hot
-
parts.
Fully recharge the D FINE approximately every six months, even
-
if you are not using the D FINE at all or only irregularly.
12

CHECKING THE PACKAGE CONTENTS

Make sure that the package contents are complete and that all
parts are undamaged before you commission the D FINE.
1. Take the D FINE and all accessories out of the packaging.
2. Use the following list to check whether the package contents
are complete.
The package contents contain the following individual parts:
• D FINE speaker
• Power cable with wall adapter
• AUX cable (3.5 mm plug cable)
• User manual
3. Check whether the D FINE or the accessories are damaged.
If this is the case, do not use the D FINE. Instead, contact the
manufacturer at the service address.
TURNING THE D FINE ON
• Hold the button on the top of your D FINE down for 3
seconds to switch the D FINE on.
The D FINE automatically connects with the last Bluetooth®
source (blue LED illuminates continuously) or switches to pairing
mode if the last source is not available (blue LED blinks quickly).
PAIRING
Connecting via Bluetooth® function:
1. Activate Bluetooth® on the source device (Bluetooth®
settings).
2. Go to the Bluetooth® settings and scan for discoverable
devices.
3. Select "DOCKIN D FINE" from the Bluetooth® device list.
13