Step 4 - Genmitsu Jinsoku LE-1620 Benutzerhandbuch

Step 4: Wire Connection
① Connect with the stepper motor according to the line of the stepping motor on the X axis.
② Connect the laser lead and cooling fan lead to the laser drive module as shown in the figure. Observe the color coding of the two
connection lines.
③ Tie the wire harness with the tie as shown in the figure.
X-Axis Stepper Motor
X-Axis Stepper Plug
Wire Connection Complete
Tie
Tie
Laser Line
Laser Line
Laser Line
Laser Driver Board
09