Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Step 3: Install the Laser Module and Anti-Skid Rubber Pad
① Fix the laser module to the focusing module with 4 M3 screws.
② Remove the adhesive release paper from the anti-skid rubber mat and install 4 Anti-skid rubber pads as shown in the picture.
Anti-Skid Rubber Mats
M3 Screws
Focusing Module
Anti-Skid Rubber Mats
Laser Module
08
Werbung
Inhaltsverzeichnis
