Cleaning And Maintenance - Hyundai 56189 Bedienungsanleitung

Only insert the key in the lock when the
work is started and always remove the
key when the machine is not used (even
for a short time)..
Adjusting the cutting height (fig. G)
The machine is equipped with a central
height adjustment with which the lawn
height can be set between 20 and 70
mm.
1. Pull the handle slightly outward.
2. Slide the lever to the desired position.
3. Release the lever.
Switching on and off (fig. A)
1. Keep the safety switch (2) pressed.
2. Pull the on / off switch (1 or 3) to start the engine.
3. Release the safety switch once the engine has
started.
4. Release the power switch to turn off the engine.
WARNING! After releasing the on/off
switch, the blade continues to rotate for a
while. Wait for the blade to come to a
complete stop before moving the
machine or performing maintenance..
Using the mulching plug (fig. E)
With mulching mowing, the clippings are
ground into small particles (mulch) that
remains on the lawn with which the lawn
is fertilized.
1. Remove the grass catcher and install the
mulching plug.
Tips for mowing
• The cutting height can be adjusted between 20
and 70 mm. We recommend an average cutting
height of 40 mm for an optimal lawn.
• If the grass is too high, we recommend that you
mow in several steps. Start with the maximum
cutting height and only then adjust the cutting
height in 2 or 3 steps.
• Move the lawn mower slightly slower so that the
grass can collect better.
• If the lawn is uneven, we recommend mowing at
the highest position.
• Do not mow grass that is too damp or wet. The
machine's performance and cutting quality are
negatively affected. There is also a risk of electric
shock.
• Mow in straight lines as much as possible and
always with the same height setting. Overlap the
strips by a few centimetres.

CLEANING AND MAINTENANCE

Regular cleaning and maintenance is
essential for long-term, safe and reliable
use of the machine. Clean the machine
after each use.
Remove the security key and both
batteries.
Wear suitable gloves.
• Remove and empty the grass catcher. Clean the
grass catcher with water and let it dry.
• Remove grass clippings, dust and dirt from the
housing with a brush.
• Clean the ventilation openings with a brush, this
improves the cooling capacity and prevents
overheating of the batteries and the machine.
• Do not use water to clean the machine. This can
damage electrical components.
• Never use a pressure washer to clean your
machine.
• Do not use chemicals, gasoline or solvents to
avoid damage to the plastic parts. Wipe the
machine with a damp cloth.
• Regularly check that all screws, nuts and bolts
are tight.
• Check that all guards and covers are properly
attached and function properly.
• Damaged or worn parts must be replaced with
original accessories.
• Check the grass catcher regularly. Can be
damaged in the grass catcher vacuumed objects
are ejected. This could potentially cause injury or
damage.
ENGLISH
13