Herunterladen Inhalt Inhalt Diese Seite drucken

Storing Food; Cleaning, Care & Maintenance; Cleaning The Condenser - Polar CB507 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für CB507:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 20
Turn On (CB509/DP289)
The control panel for the CB509/DP289 is located on the front of the appliance.
1. Close the door of the appliance.
2. Connect the appliance to a mains power supply.
3. Turn the light On or Off by pressing the

Storing Food

To get the best results from your POLAR appliance, follow these instructions:
Only store foodstuffs in the appliance when it has reached the correct operating temperature.
Do not place uncovered hot food or liquids (like acidic fluids) inside the appliance (as it can damage
the evaporator).
Wrap or cover food where possible.
Do not obstruct the fans inside the appliance.
Avoid opening the doors for prolonged periods of time.
Cleaning, Care & Maintenance
Switch off and disconnect from the power supply before cleaning.
Clean the interior of the appliance as often as possible.
Do not use abrasive cleaning agents. These can leave harmful residues.
Clean the door seal with water only.
Always wipe dry after cleaning.
Do not allow water used in cleaning to run through the drain hole into the evaporation pan.
Take care when cleaning the rear of the appliance. Sharp edges can cut.
Condensation will form in refrigeration with frequent opening of the doors and on hot humid
days, please ensure condensation is allowed to drain properly or is wiped dry.

Cleaning the Condenser

Periodically cleaning the condenser can extend the life of the appliance.
POLAR recommend that a POLAR agent or qualified technician clean the condenser.
Troubleshooting
A qualified technician must carry out repairs if required.
Fault
The appliance is not
working
CB507-CB509-G619-G211-DP288-DP289_ML_A5_v21_20220526.indb 5
CB507-CB509-G619-G211-DP288-DP289_ML_A5_v21_20220526.indb 5
button.
Probable Cause
The unit is not switched on
Plug or lead is damaged
Fuse in the plug has blown
Mains power supply fault
Solution
Check the unit is plugged in correctly and
switched on
Replace Plug or lead
Replace the fuse
Check mains power supply
EN
5
2022/5/26 11:56
2022/5/26 11:56

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Cb509G619G211Dp288Dp289

Inhaltsverzeichnis