Switching The Fr2 Bands In Safety Eval Mode; Switching The Fr2 Bands In The Antenna Menu - NARDA 3591/01 Handhabung Und Wartung

1. Press one of the frequency
setting softkeys (Fmin, Fmax,
Fcent, Fspan).
 The settings window opens
and the softkey LNB Ant.
Band is shown in the button
bar.
2. Press the LNB Ant. Band: toggle softkey and use the rotary control or
the arrow keys to select a band.
3. Press the OK key to accept setting.
 The selected band is shown in the antenna name: Band: A, Band: B

Switching the FR2 bands in Safety Eval mode

When using the Safety Evaluation Mode, make sure that a separate service
table is created for each of the two bands (see SRM-3006 Operating
manual ), since automatic band switching within a table is not supported
 The frequency band can be switched manually in the antenna menu
(see Switching the FR2 bands in the Antenna menu).

Switching the FR2 bands in the Antenna menu

The FR2 bands can also be switched in the Antenna menu.
1. In the Main menu select
Settings > Antenna.
 The Antenna settings page
opens.
2. Press the LNB Ant. Band
softkey to toggle bands.
44 5G LNB Antenna
Narda