Instructions; Child Lock - TCL Breeva A2W Benutzerhandbuch

Instructions

On/off
Light on
Mode
Light on
Timer
Light on
Anion
Light on

Child Lock

Light on
Insert the power plug into the socket and press the "on/off"
button to turn on the machine.
Insert the power plug into the socket and press the "on/off" button
to turn on the machine.
When the air purifier is on, press the power button to re-enter the
standby state. The power button light will be half lit. * Standby refers
to the state when the device is connected to power but is not turned
on.
While powered on, press the wind speed button to adjust the wind
speed in the following order:
Sleep-1st gear-2nd gear-3rd gear-Automatic.
In automatic mode, when the air quality is excellent, it operates in
the first gear, when the air quality is medium, it operates in the
second gear, and when the air quality is poor, it operates in the third
gear.
In sleep mode, all lights are at 50% brightness. Press and hold the
wind speed button for 3 seconds to turn on/off the lights on the
control panel. When the control panel lights are off, if touched, the
rest of the button panel will light up by 50%. The lights will turn off
again if there is no operation within 10 seconds.
Press the timer button while the unit is on to turn on the timer
function.
The time can be set to 1H-2H-4H-8H-cancel time intervals, and the
corresponding indicator will turn white. After setting the timer to
turn off, press the power button to cancel the timer setting and
immediately enter the standby mode.
While the device is on, press the anion button to turn on/off the
anion function.
Press and hold for 3 seconds to turn on the panel lock. Once the panel
is locked, users will be unable to change any settings. You can unlock
the device by pressing the lock icon for 3 seconds.
- 10 -