System Test; Factory Settings - EUROHUNT EVOLUTION Bedienungsanleitung

10. System test

With the system test, you can make a test run. This is of
particular advantage to check the unit for functionality.
To start the test, simply
press the
item
in the display and a count-
down of 10 seconds starts.
The countdown
stopped with
The motor then runs for 7
seconds. The motor sym-
bol rotates next to the sec-
onds display. The test run
can also be interrupted
here with any key.
ATTENTION!
Do not reach into the engine while it is running!

11. Factory settings

Press the reset button to reset the automatic feeder to
the factory settings.
AT TENTION! All settings will be lost.
key. The menu
now appears
can be
any key.
17