Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Storage - JH Collection VG1 Matrix Glossy Benutzerinformationen Und Anweisungen

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 15
INSTRUCTIONS FOR USE
THIS HELMET MUST BE WORN AT ALL TIMES DURING HORSE RIDING ACTIVITY. FOR
ADEQUATE PROTECTION, IT IS IMPORTANT THAT THE HELMET BE SIZED CORRECTLY
AND FIT THE HEAD PROPERLY TO OFFER OPTIMUM COMFORT AND SAFETY.
After properly buckling and adjusting the strap, always check that the helmet is not
excessively tight, doesn't move freely back and forth or side to side, and is well
seated and centered on the head (Fig. 1). The less the helmet can move, the better
protection it will provide.
Before donning, rotate the adjustment dial on the back of the cradle anticlockwise
until the cradle is in its widest position.
Put on the helmet and adjust the dial(clockwise to tighten, anticlockwise to loosen)
until you obtain the desired fit (Fig. 2).
Fasten the chin strap by inserting one side of the buckle into the other, until you
hear the locking mechanism click shut (Fig. 3). Tug strap to ensure that the buckle
is securely fastened.
Adjust the length of the chin strap to fit the helmet securely to your head. Slide the
strap loop to hold loose strap in place.
To position the chin strap correctly, adjust the chin strap dividers forward to back
until they sit directly under your ears (Fig. 4).
To remove the helmet, release the chin strap by squeezing together the tips of the
male side of the snap buckle (Fig. 5).

CLEANING AND STORAGE

Never treat the helmet with aggressive cleaning agents, solvents (e.g. benzine,
acetone, trichlorethylene, etc.), or paints, glues, petrochemicals, which can damage
the helmet shell. For cleaning, use neutral PH mild water and soap, wipe it off and let it
dry slowly in normal room temperature. The inner padding is removable and
washable separately at maximum 30°C. Keep the helmet in a cool & dry place away
from direct sunlight. Do not expose it to conditions of extreme cold or heat. During
transportation, please be sure to protect the helmet sufficiently against possible shock
(fall). A free fall of the helmet, even at low height, may destroy its structure and thus
render it unusable. It is advisable to transport it in a special padded cover to minimize
the risk of such damage.
3
4
GB
5

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis