Inhaltsverzeichnis User Guide ArkCam Smart & ArkCam Basic Systemskizzen / System drawing ArkCam Smart Einstellungen / Configuration ArkCable 6.5 ArkCam Basic Einstellungen / Configuration VLC Player Einstellungen VLC Player Configuration GStreamer ArkCam Viewer Abmessungen / Dimensions ArkCam Smart & Basic+...
Seite 3
ArkCam Smart TX ArkCam Smart ArkCable 4.X ArkCable 9.X ▪ ArkCable 6.X Power 9-32 VDC ▪ Digital I/Os 2xInput/ 2xOutput ▪ CAN-FD XXV DC Laptop / PC ArkCam Smart+ ArkCable 1.X ArkCable 2.X ArkCable 6.X ▪ Power 9-60 VDC ▪...
Seite 4
ArkVisionUnit / ArkSwitch T1 / ArkCam Basic T1 ArkCam Basic oder/or ArkCam Basic+ mini ArkCable 9.X ArkCable 11.X 9-32V DC ArkCam Basic+ ArkCable 9.X ArkCable 15.X 9-60V DC XXV DC ArkCable 1.X ArkCable 2.X (9-60V DC oder PoE) ArkCam Basic oder/or ArkCam Basic+ mini ArkCable 11.X ArkCable 8.X...
Seite 5
ArkCam Smart Auslieferungszustand / Delivery status ArkCam Smart ▪ Stream-Source-IP: 192.168.0.75 ▪ Stream-Destination-IP: 192.168.0.150 ▪ Netmask: 255.255.255.0 ▪ Port: 5004 Systemvoraussetzungen / System requirements ArkCam Smart Netzwerkkamera ArkCam Smart Network Camera ▪ ▪ Anschlusskabel siehe Systemaufbau Seite 2 Connection cable according to system ▪...
Seite 6
ArkCam Smart Konfiguration Host PC / Configuration Host PC IPv4 Eigenschaften im Netzwerkadapter auf Set IPv4 properties in the network adapter to ▪ ▪ feste IP 192.168.0.150 setzen fixed IP 192.168.0.150 (Standardzieladresse der Kamera) (camera default destination address) Aktive Firewall und Antivirenscanner Disable active firewall and antivirus scanners! ▪...
Seite 7
ArkCam Smart Konfiguration / Configuration ArkCam Smart Aufruf der Kamerawebseite im Browser über The camera web page in the browser via net- ▪ ▪ Netzwerkadresse 192.168.0.75 work address 192.168.0.75 Einstellungen auf der entsprechenden Change settings on the corresponding ▪ ▪...
ArkCable 6.x Offene Litzen 8polig / M12 Female A-kodiert 8polig Open wire 8pole / M12 Female A-coded 8pole Kabel / Cable Länge / Stecker / Connector white CAN H brown CAN L M12 - Female green yellow gray GPI 2 pink GPI1 IP68...
Seite 9
ArkCam Basic Auslieferungszustand / Delivery status ArkCam Basic ▪ Stream-Source-IP: 192.168.0.85 ▪ Stream-Destination-IP: 192.168.0.150 ▪ Netmask: 255.255.255.0 ▪ Port: 5004 Systemvoraussetzungen / System requirements ArkCam Basic Netzwerk-Kamera ArkCam Basic Network Camera ▪ ▪ Anschlusskabel gemäß Systemaufbau Seite 2 Connection cable according to system ▪...
ArkCam Basic Konfiguration Host PC / Configuration Host PC IPv4 Eigenschaften im Netzwerkadapter auf Set IPv4 properties in the network adapter to ▪ ▪ feste IP 192.168.0.150 setzen fixed IP 192.168.0.150 (camera default destina- (Standardzieladresse der tion address) Kamera) Disable active firewall ▪...
Seite 11
ArkCam Basic Konfiguration Tool / Configuration Tool alle Netzwerkadapter außer dem, an dem die all network adapters except the one to which ▪ ▪ Kamera angeschlossen ist, müssen deaktiviert the camera is connected must be deactivated! sein! zum Starten des Konfigurationstools starten to start the configuration tool launch the file ▪...
Seite 12
VLC Player VLC Netzwerkcache Konfiguration Aufruf des Menüs „Werkzeuge - Einstellungen“ Dann im nächsten Fenster unten links „Alle“ Einstellungen auswählen, um in die erweiterten Einstellungen zu gelangen. Anschließend im Fenster links den Block „Eingang / Codecs“ auswählen. Im rechten Feld dann zum Block „Erweitert“ herunterscrollen und die Einstellung „Cachewert für das Netzwerk (ms)“...
Seite 13
VLC Player VLC Netzwerkcache Configuration Call up menu „Tools - Preferences“ Then select "All" settings in the lower left corner of the next window to get to the advanced settings. Then select the block "Input / Codecs" in the window on the left. Then scroll down to the "Advanced"...
GSTreamer für/for ArkCam´s GStreamer GStreamer kann unter folgendem Link heruntergela- GStreamer can be downloaded from the following den werden. link. https://gstreamer.freedesktop.org/data/pkg/ https://gstreamer.freedesktop.org/data/pkg/ windows/1.16.2/gstreamer-1.0-mingw-x86_64- windows/1.16.2/gstreamer-1.0-mingw-x86_64- 1.16.2.msi 1.16.2.msi Nach dem Start der Installation, wird der Typ der In- After starting the installation, the type of installation stallation abgefragt, hier wählt man „Custom“.
Seite 15
GSTreamer für/for ArkCam´s GStreamer Anschließend öffnet man über „Erweitert- Then open the variable editor via "Advanced environ- Umgebungsvariablen“ den Variableneditor. ment variables". Dort erweitert man die Variable „Path“ im Abschnitt There you extend the variable "Path" in the section „Systemvariablen“ um den Installationspfad von "System variables"...
Seite 16
GSTreamer für/for ArkCam´s GStreamer Dazu die Variable „Path“ im Abschnitt wählen und „Bearbeiten…“. „Systemvariablen“ aus- Hier wird der Pfad durch die Schaltfläche „Neu“ hinzu- Here the path is added by the "New" button. This gefügt. Dieser sollte bei der Standardinstallation wie should be with the standard installation as follows: folgt sein: C:\gstreamer\1.0\x86_64\bin C:\gstreamer\1.0\x86_64\bin.
ArkCam Viewer für/for ArkCam´s ArkCam Viewer Nach der Installation von GStreamer lässt sich der After installing GStreamer, ArkCamViewer can be ArkCamViewer über die exe starten. Beim aller- started via the exe. At the very first start the ersten Start sollte sich die Windows-Firewall mel- Windows firewall should report.