xarvio CONNECT Schnellstartanleitung Seite 6

Copy maps from
device to terminal
1.
Connect the device to the terminal.
2.
Turn on the terminal. The device will
switch to copy mode (green light).
3.
Use the navigation of your terminal
to browse the device.
4.
Select and load the maps onto
the terminal.
Transfer maps from terminal
to xarvio FIELD MANAGER
1.
Use the navigation of your terminal
to export the maps to
the connected device.
2.
Disconnect the USB cable or turn off the
terminal. The device will switch to
transfer mode (red light).
3.
Maps are automatically transferred
to xarvio FIELD MANAGER.