Electric Connections; Remote Control - jet vag JUNIOR Installationsanleitung

5.

electric connections

This must be done by a qualified technician.
- Check that the voltage corresponds to the equipment supplied.
- Place the switch box no further than 20 m from the pneumatic push-button (max length).
Refer to the manual for further information.
- With a Piezo electric control, there is no maximum distance.
6.
operation
Once the CCS has been installed, check the direction of rotation of the pump motor (for a
3-phase pump). The CCS is equipped with a patented control system for the air and water flow
rates that only affects the front nozzle (exept PRO LUXE and ALVEO'NOX)
REMOTE CONTROL
• The remote control allows you to trigger your counter-
current swimming system remotely.and, in the case of the
LUM JET VAG, to control your light façade.
• Remote control synchronization: During the 15 seconds
of powering up the case, press and hold keys A and B
simultaneously
• Use
JUNIOR PRO / NEW JET VAG / ALVEONOX / PRO LUXE
Button A: ON/OFF Pump
LUM JET VAG
Button A: 1st pulse - ON light
2 Fast Pulses - Program Change
1 pulse - OFF light
Button B: ON/OFF Pump
FLOW
water flow setting*
air flow setting**
* The water flow setting on the front panel PRO LUXE
is carried out on the notched wheel
** Except for ALVEONOX front panel
18
JUNIOR / JUNIOR PRO - ALVÉO'NOX - NEW JET VAG - PRO LUXE - LUM JET VAG