Operation; Before Initial Operation - yuna FROSTER 300 Bedienungsanleitung

The appliance must stand in a stable and level position to ensure proper
operation. The supporting feet and the rollers
so that the appliance does not wobble. Adjust the supporting feet accordingly.
The firm contact of the supporting feet and the rollers
ensures that the appliance does not vibrate, move or roll away unintentionally.
If you have to move the appliance, set the adjustable feet to minimum position
so the appliance can be moved on its rollers
transport has been completed.
NOTICE! The rollers (depending on model) are no castors and intended
to move the appliance forward and backwards only. Lateral movements
can damage your floor and the rollers.

4. Operation

WARNING! To disconnect the appliance from the mains, you must
unplug the appliance or use a cut-off device.

4.1 Before initial operation

WARNING! While unpacking, the packaging materials (polythene
bags, polystyrene pieces, etc.) should be kept away from children and
pets. CHOKING HAZARD! RISK OF INJURY!
NOTICE! Leave the appliance in an upright position for at least 4 - 5 hours
before you connect it to the mains to ensure, that the oil has flowed back
into the compressor.
NOTICE! If you use the appliance for the first time or the appliance has
been disconnected from the mains for a longer period of time, allow the
appliance to cool down for 3 until 4 hours on medium temperature setting
(s. chapter 4.5
SETTING OF THE TEMPERATURE
seq.) before you place any fresh or frozen food in the appliance. If you
place food in the appliance before it has reached its normal operating
temperature, the food can thaw and / or spoil.
Depending on model.
16
Depending on model.
17
Depending on model.
18
must stand firmly on the ground
16
17 with the ground also
easily. Readjust the appliance when
18
/ F F
AST REEZING
M et
ODE
58