Technical Specifications; Operating Conditions; Before First Use - Banquet Shady Bedienungs- Und Wartungsanleitung

EN

Technical specifications:

Type: 14012201
Voltage: 220-240V 50/60Hz
Input power: 1850-2200 W
Protection class: I
Cover: IP X0
Volume: 1,5 l
This product meets all the essential requirements of the EU directives that apply to it.

OPERATING CONDITIONS:

The kettle can be operated only in environments with normal influences according to the ČSN 33 2000-3 standard.
The product is intended for home use only, otherwise the product warranty is void. The kettle must not be operated
in areas with explosion and fire hazard.
INSTRUCTIONS FOR USE:

Before first use:

• Please read this manual carefully. Keep the instructions for future reference.
• Carefully remove the packaging material.
• Before the first connection, check that the mains voltage matches the voltage specified on the label on the
bottom of the kettle stand.
• The kettle can be connected only to a properly grounded socket.
• Use the kettle only with the stand supplied with it. Do not use the supplied stand with other kettles.
• Place the stand on a horizontal and stable surface so that it cannot overturn during operation.
• Fill the kettle with drinking water to the maximum permitted level marked with a line. Heat the water to the
boiling point and then pour it out. Repeat this 4 times to clean the kettle properly. Rinse the kettle with drinking
water before each boiling.
Use:
• Remove the kettle from the stand.
• Open the lid of the kettle. Fill the kettle with the required amount of water so that the water level is between the
MIN and MAX marks on the water level indicator.
• Do not fill the kettle above the MAX mark on the level indicator. If the kettle is overfilled, hot water may splash
out.
• Close the lid with gentle pressure.
• Before putting the kettle into operation, it is necessary to check whether the heater is completely covered with
water.
• Put the kettle back into the stand.
• Insert the plug into the socket.
2