Assembly Procedures - Neoclima 547710 Gebrauchsanweisung

Parts supplied:
Stand with LPG cylinder housing and 3 post
brackets.
9 cup nuts (M 6 m m), 9 small screws (M 6 x
10 m m ), 9 small � at washers (Ø 6 mm) for
re� ector assembly.
6 large bolts and � ange nuts (M 6) for
support legs/main pole assembly.
3 medium bolts (M8 x 15 mm) for support
legs/stand assembly.
3 re� ector spacers and wing nuts, 9 large
� at washers for re� ector and burner
GB
assembly.
3 pcs ground � xer
6 pcs M6 x 10 mm ground � xer bolts & nuts

ASSEMBLY PROCEDURES

STEP 1
1-1. Put the 3 pcs post brackets on each
position on the base as shown in the
picture.
1-2. Use 3 Medium Bolts(M8x15) to join the
post brackets and stand.
56
STEP 2
2-1. Put the post on the top of 3 pcs post
brackets.
2-2. Use 6 Large Bolts and Flange Nuts
(M6) to connect the post to the 3 pcs post
brackets. Tighten the bolts and nuts.